To use IO Star sanitizer effectively, there are several methods you can choose from depending on your preference and the surface you are sanitizing. Here are some detailed instructions for each method:
1. Cloth or Sponge Application:
– Start by preparing a solution of IO Star sanitizer according to the recommended dilution ratio on the label.
– Soak a clean cloth or sponge in the solution and wring out any excess liquid.
– Gently wipe the surface you want to sanitize, making sure to cover all areas thoroughly.
– Pay special attention to areas that are commonly touched or prone to contamination.
– Allow the IO Star sanitizer to remain in contact with the surface for at least 1-2 minutes to ensure proper sanitization.
– After the contact time, there is no need to rinse the surface. Simply allow it to air dry.
2. Mop Application:
– Dilute IO Star sanitizer according to the recommended ratio in a bucket of water.
– Dip a mop into the solution and wring out any excess liquid.
– Mop the floor, ensuring that the entire surface is covered with the sanitizer solution.
– Allow the solution to remain on the floor for the recommended contact time.
– There is no need to rinse the floor after sanitizing. Let it air dry completely.
3. Spray Application:
– Prepare the IO Star sanitizer solution by diluting it according to the recommended ratio.
– Transfer the solution to a spray bottle, ensuring you use a coarse mist, pump, or trigger sprayer.
– Hold the spray bottle about 6-8 inches away from the surface you want to sanitize.
– Spray the IO Star sanitizer solution, ensuring that all areas are covered evenly.
– Use a brush or sponge to spread the sanitizer solution and ensure better coverage.
– Allow the sanitizer to sit on the surface for at least 1-2 minutes.
– Drain any excess sanitizer, but do not rinse the surface. Let it air dry.
4. Immersion:
– For smaller objects or items that can be submerged, prepare a solution of IO Star sanitizer according to the recommended dilution ratio.
– Submerge the items in the solution, ensuring they are completely covered.
– Allow the items to soak for the recommended contact time.
– Remove the items from the solution and let them air dry. No rinsing is required.
It's important to note that IO Star sanitizer is designed to be a no-rinse sanitizer, so there is no need to rinse the surface or objects after using it. The sanitizer will evaporate and leave no residue behind.
Personal Experience: As a brewer, I have used IO Star sanitizer extensively in my brewing process. I find the spray application method to be particularly effective, as it allows me to easily cover all the surfaces of my brewing equipment. I usually follow up the spray application with a brush to ensure better coverage, especially in hard-to-reach areas. The no-rinse feature of IO Star is also a time-saver, as I can simply let the equipment air dry without the need for additional rinsing steps. IO Star sanitizer has been a reliable and efficient sanitizer in my brewing practice.