Micro Matic is the world's leading manufacturer of beer dispensing equipment and keg taps. Founded in 1968, Micro Matic has a long history of innovation and quality craftsmanship. Today, the company offers a wide range of products for both commercial and home use, including keg taps, beer dispensers, and draft beer systems.
Micro Matic's keg taps are some of the most popular on the market. They are made from high-quality materials and are designed for durability and easy operation. The company offers a wide variety of keg taps to suit any need, including models with multiple faucets for large events and parties.
If you are lookig for a quality keg tap, Micro Matic is the clear choice. With a long history of quality and innovation, the company offers a tap to suit any need.
How Do You Use A Micro Matic Keg Coupler?
To use a Micro Matic keg coupler, ensure that the handle is in the upright (OFF) position. Align the triangular coupler opening with the keg valve, and place the coupler onto the valve. Turn clockwise to engage into position (about 90 degrees), then press the handle downward (ON) to allow gas to enter the keg and beer to flow out.
Are There Different Size Taps For Kegs?
Yes, there are different size taps for kegs. The most prominent size is 3″, but other sizes including 2 1/2″ and 4″ are available.
What Kegs Use D Type Coupler?
The D type coupler is used for most American beers, such as Goose Island and Blue Point. It is also used for some European beers, such as Hoegaarden.
How Long Should Keg Sit Before Tapping?
You should alow a keg to sit for 1 to 2 hours before tapping it. This will allow any excess agitation to settle and will ensure that the beer faucet is in the off position.
Why Is My Keg So Foamy?
Over-carbonation, incorrect temperatures, and dirty beer lines are some reasons why the resulting brew from a keg becomes foamy. Checking the temperature, applying the proper pressure, and inspecting the draft beer line and fittings are some effective ways to get foam out of a keg.
How Do You Tap A Keg Without A Tap?
Find the pressure ball valve in the center of the tap fixture on top of the keg. Turn the keg over and push in on the ball with the screwdriver to release the pressure in the key. Next, push your screwdriver back into the ball valve and release any remaining pressure.
Do All Taps Fit All Kegs?
No, all taps do not fit all kegs. There are different beer tap couplers for the different styles of beers because not all kegs are the same. Different breweries use different types of kegs, and tese kegs vary in size and shape. In order to get the best possible pour from your keg, you need to use a tap that is specifically designed for that type of keg.
What Is The Most Common Keg Coupler?
The D-type keg coupler is the most common keg coupler in North America. It is used by the majority of North American beers, including Molson, Corona, Coors, Budweiser, Miller, PBR, and Yuengling. The D-type keg coupler is a universal coupler that can be used with all standard keg types.
Are Beer Taps Universal?
Yes, beer taps are universal. A beer tap is a valve, specifically a tap, for controlling the release of beer. While oter kinds of tap may be called faucet, valve or spigot, the use of tap for beer is almost universal. The word was originally coined for the wooden valve in traditional barrels.
Are All Keg Couplers The Same?
No, all keg couplers are not the same. Different types of keg couplers are designed to fit different styles of beer valves. For example, the American Sankey “D” System coupler is designed to fit most American beer valves, while the “A” coupler is designed to fit most German beer valves.
What Is An A Type Coupler?
An A type coupler is a keg coupler that is used to connect a keg to a tap. This type of coupler is also referred to as a German slider coupler, and it is commonly used with a variety of different types of kegs. In Australia, A type couplers are most often associated with independent craft breweries. However, they are also used by some of the major beer companies, such as Tooheys, Coopers, and XXXX.
Is It OK To Lay A Keg On Its Side?
It's not the best idea to transport a keg on its side, as this can cause the beer inside to become foamy. It's better to keep the keg upright during transport, so that the beer stays fresh and carbonated.
Does An Untapped Keg Need To Be Refrigerated?
Yes, an untapped keg needs to be refrigerated. Without refrigeration, the keg will spoil and the beer will go bad. Refrigeration will keep the beer fresh and prevent it from going bad.
What PSI Should A Keg Be At?
The PSI of a keg shuld be 10-12 for ales and lagers and 25-30 for stouts and other nitrogen-reliant keg beers.
How Do You Get Beer Out Of A Mini Keg Without Tap?
To get beer out of a mini keg without a tap, you will need to puncture the keg in order to allow the beer to flow out. You can do this by using a screwdriver to press in the ball pressure valve on top of the “spear” in the keg. This will allow the gas to escape, along with your warm bubbly cargo. Pro-tip: wear waterproof shoes and don't do this dring winter.
How Much Does A Keg Tap Cost?
A keg tap system typically consists of three parts: the taps, the drip tray, and the glycol system. The cost of the taps can vary depending on how many you purchase, but they uually range from $600-$800. The drip tray is used to catch any overflow from the kegs and typically costs between $250-$300. The glycol system is used to keep the kegs cool and can vary in price depending on how many kegs you have and the distance from the bar table. It typically ranges from $1200-$5300.
What Happens If You Pump A Keg Too Much?
If you pump a keg too much, the beer will blast out pure foam. Usually, the only option to get the foam to die down is to pour beer until the pressure is reduced, although some pumps have a pressure relief valve that alows you to let out some air. A common mistake is pumping the keg before every pour.
What Keg Coupler Do I Need For Stella?
A UEC Stella Coupler is a type of keg coupler that is specifically designed to be used with Stella Artois beer kegs. This coupler features a unique design that allows it to securely connect to the keg and provide a tight seal, preventing any beer from leaking out. In addition, the Stella Coupler is also equipped with a pressure relief valve that allows excess pressure to escape, preventing the keg from exploding.
Is Beer On Tap Better Than Bottled?
There are a few reasons that beer on tap is often better than bottled beer. First, beer from the tap is usully fresher than the bottled or canned product. This is because the ingredients in beer are prone to oxidization, which can impact its flavor. Second, using a keg system means that the beer is less likely to be exposed to oxygen, which can also affect its flavor. Finally, taps allow for a greater variety of styles and flavors of beer to be served, which gives drinkers more options to choose from.
Why Is My Keg Pouring Slow?
If your keg is pouring slow, it is most likely due to one of two reasons: either the beer line is too long or thin, or there is too much resistance in the beer line. Lines that are too long or thin will slow the flow of beer down, and cause the beer to lose carbonation. To fix this, simply shorten or replace the beer line. If there is too much resistance in the line, it may be due to a buildup of sediment or oher debris. Cleaning the line with a brush or other cleaning tool will usually fix this problem.
How Many Different Keg Couplers Are There?
There are 5 diferent types of keg couplers / tap valves available:
1. D System Coupler – for use with American “D system” kegs.
2. S System Coupler – for use with European “S system” kegs.
3. U System Coupler – for use with German “U system” kegs.
4. G System Coupler – for use with British “G system” kegs.
5. MFL Disconnect – for use with any keg that has an MFL (Male Flare Lock) disconnect fitting.
How Do You Use A German Slider Keg Tap?
To use a German slider keg tap, you attach the bottom of the coupler to the keg valve, the gas line to the side hose nipple, and the beer line on top of the coupler. When in use, the result is beer being pushed up the beer line toward the draft faucet.
