Ball Lock and Pin Lock are two different types of keg locks used in the beer brewing process. Ball Lock is a system where the gas in and liquid out connectors are both ball-shaped, while Pin Lock is a system where the gas connector is round and the liquid connector is square-shaped.
Which type of lock is better? Let's take a closer look.
Ball Lock:
- Ball locks are the most common type of lock used in homebrewing. They are easy to use and provide a tight seal.
- Ball locks require less pressure to seal than pin locks. This can be helpful when working with sensitive ingredients like fruits and herbs.
- Ball locks are less likely to leak than pin locks.
Pin Lock:
- Pin locks are less common than ball locks, but they still have their place in homebrewing.
- Pin locks provide a stronger seal than ball locks. This can be helpful when working with high-gravity beers or when using a lot of hops.
- Pin locks are more difficult to use than ball locks. This can be frustrating for brewers who are new to homebrewing.
Are Ball Lock And Pin Lock Posts Interchangeable?
Yes, ball lock and pin lock posts are interchangeable. Both styles use the same dimensions, so they can be swapped out as needed.
What Is A Sanke Keg?
A Sanke keg is a type of beer keg that has a single valve on the top of it. This valve allows both beer and gas to pass through the keg. The beer flows through a spear in the valve that runs to the bottom of the Sanke keg.
How Does A Ball Lock Pin Work?
A ball lock pin is a quick release pin that uses a spring-loaded ball to lock into place. When the push button is activated, the balls are drawn into the pin shaft. When the button is released, the spring-loaded ball locks back into place, keeping the balls locked inside the pin shaft.
How Do Ball Locks Work?
Ball locks work by using three balls that expand into a tapered groove in the receiver bushing. This action draws the plates togeher and locks them in place. The locking balls are activated by turning a setscrew in the head of the shank, which pushes a fourth ball to evenly distribute the clamping forces between the three locking balls.
How Do You Remove A Ball Lock From A Keg?
To remove a ball lock from a keg, you will need to unscrew the post counter clockwise. You can use a socket or a wrench to do this, but be careful not to damage or strip the posts.
How Do You Bleed A Pin Lock Keg?
The easiest method is to simply connect the gas to its post at low pressure (4-5 psi) whie keeping the lid slightly cracked. The gas will flow and be released out the cracked lid.
What's The Difference Between Pin And Ball Lock Kegs?
There are two types of ball lock kegs: Cornelius kegs and Firestone kegs. Cornelius kegs have a single gas-in and liquid-out connection, while Firestone kegs have two of each. Pin lock kegs have three connections: two for gas and one for liquid. The difference in the number of connections is due to the fact that pin lock kegs use a differet method to secure the fittings. Instead of using ball bearings, they use pins that fit into notches on the fittings. This allows for a more secure connection, but it also makes it more difficult to connect and disconnect the fittings.
What Are The Two Types Of Kegs?
There are two types of kegs: pin lock kegs and ball lock kegs. Pin lock kegs have a pin on the side that must be depressed in order to release the pressure from the keg. Ball lock kegs have a lever on the top that is pushed down in order to release the pressure.
Why Is It Called A Sankey Keg?
A Sankey keg is a type of beer keg that has a single valve on the top, which allows for both beer and gas to pass through. The beer flows through a spear in the valve that runs to the bottom of the sanke keg. A sankey coupler is essentially a key (sankey) to unlock the beer inside the sanke keg. The name “Sankey” comes from the original manufacturer of this type of keg, Sankey Inc.
How Many Types Of Locking Pins Are There?
There are two types of locking pins: ball-lock and quick-release. Ball-lock pins have a ball at the end of the pin that fits into a corresponding hole in the body of the pin. Quick-release pins have a button or lever that when actuated, releases the pin from its locked position.
What Is A Ball Pin?
The ball pin is the small, round object that is inserted into the hole at the top of a bowling ball. The purpose of the ball pin is to act as a weight inside the ball that helps it to rotate correctly. The ball pin also helps to keep the bowling ball from becoming deformed over time.
What Is A Locking Pin?
A locking pin is a pin that is used to control what key(s) can operate a lock. Lock-Pin. Pins are sometimes called tumblers (a misnomer). They are manufactured in varous lengths relative to the diameter of a given lock cylinder plug. Common after-market pins have a conical end and a flat end.
Which Pin Gives Positive Locking?
A split pin gives positive locking by passing through two slots in the nut and a hole in the bolt. This prevents the pin from shearing, and prvides a secure hold for the nut and bolt.
What Is A Pepsi Style Keg?
Pepsi style kegs are those used by evryone else (aka General Beverage). They use ball lock disconnects to connect & disconnect the gas and liquid lines. Ball lock disconnects push on and lock in place with a lever.
What Type Of Keg Do I Have?
There are a few ways to determine the type of keg you have. One is to look at the stamp or markings on the side of the keg. Another is to measure the keg. Kegs are typically either ½ barrels, ¼ barrels, or 1/6 barrels.
What Kind Of Kegs Can You Get?
There are many types and sizes of kegs available on the market today. The most common type of keg is the half-barrel, which is 15.5 gallons or 124 pints. There are also quarter-barrels (7.75 gallons), mini-kegs (1.32 gallons), and Cornelius kegs (5 gallons). Kegs can be made of stainless steel, aluminum, or plastic, and they can have either a single or double wall construction.
