You can definitely change the banner in a retractable banner stand! It’s a simple process that can be done in just a few steps. I’ll guide you through the process, providing clear instructions along the way.
1. Fully extend the existing banner graphic: Start by locating the base of the retractable banner stand. You’ll notice a hole on the left side of the base. Take the provided pin and insert it into this hole. This will help to fully extend the existing banner graphic from the base, making it easier to work with.
2. Remove the existing graphic from the mechanism: Once the banner is fully extended, you’ll need to carefully remove the existing graphic from the mechanism. Take your time and be gentle to avoid any damage. The existing graphic is usually attached to the mechanism using adhesive.
3. Prepare your replacement graphics: Before attaching the replacement graphics, make sure they are ready. If you have pre-designed graphics, ensure they are the correct size and properly printed. It’s always a good idea to have a backup plan in case the replacement graphics are not available or not suitable.
4. Attach replacement graphics using adhesive: Once the existing graphic is removed, it’s time to attach the replacement graphics. Most retractable banner stands come with pre-attached adhesive on the back of the graphics. Simply peel off the protective backing and carefully align the graphics with the mechanism. Slowly press the graphics onto the mechanism, ensuring there are no wrinkles or bubbles.
5. Double-check and make adjustments if necessary: After attaching the replacement graphics, take a step back and inspect the banner. Make sure it is properly aligned and there are no issues with the graphics. If needed, make any necessary adjustments to ensure a perfect display.
That’s it! You have successfully changed the banner in your retractable banner stand. The process is relatively straightforward and shouldn’t take much time or effort. Remember to always handle the graphics with care to avoid any damage.
Here’s a quick summary of the steps:
1. Insert the pin to fully extend the existing banner graphic.
2. Remove the existing graphic from the mechanism.
3. Prepare your replacement graphics.
4. Attach the replacement graphics using the pre-attached adhesive.
5. Double-check and make any necessary adjustments.
I hope this detailed explanation helps you change the banner in your retractable banner stand with ease. Happy banner swapping!