Cleaning keg lines is an essential part of maintaining the quality and taste of your beer. Kegco provides a simple and effective method to clean their keg lines, ensuring that any remaining beer and contaminants are thoroughly removed.
To begin the cleaning process, you will need to fill the system with a cleaning solution. It is important to choose a suitable cleaning solution that is specifically designed for beer lines. These solutions are usually alkaline-based and can effectively break down any beer residue and bacteria present in the lines.
Start by disconnecting the keg and tapping system from the beer lines. This will allow you to have easy access to the lines for cleaning. Next, prepare a bucket or container with the appropriate amount of cleaning solution. Follow the instructions provided by the manufacturer to determine the correct ratio of solution to water.
Once the cleaning solution is ready, attach one end of a cleaning line to the beer faucet and the other end to the container filled with the cleaning solution. Make sure the line is securely attached to prevent any leaks. Open the faucet and allow the cleaning solution to flow through the lines.
It is recommended to let the system soak for at least 30 minutes to ensure that the cleaning solution has enough time to break down any stubborn residue. During this time, you can clean other parts of your kegging system, such as the faucet, coupler, and keg.
After the soaking period, it's time to flush out the dirty-green solution from the lines. Attach a clean line to the beer faucet, ensuring a secure connection. Place the other end of the line into a bucket or drain. Open the faucet and allow the solution to flow out of the lines. This step helps remove any loosened residue and bacteria from the system.
Once the dirty solution has been completely flushed out, it's time to replace it with fresh cleaning solution. Prepare another container with the appropriate amount of cleaning solution, following the manufacturer's instructions. Attach the clean line to the beer faucet and the other end to the container filled with the fresh cleaning solution. Open the faucet and let the solution flow through the lines.
Allow the fresh cleaning solution to circulate through the lines for a similar period as the initial soaking time. This will ensure that the lines are thoroughly cleaned and sanitized. During this time, you can clean other components of your kegging system, such as the taps and couplers, to maintain optimal hygiene.
After the desired contact time has passed, flush out the purple cleaning solution from the lines. Attach a clean line to the beer faucet and place the other end into a bucket or drain. Open the faucet and allow the solution to flow out, ensuring that all traces of the cleaning solution are removed.
It is crucial to rinse the lines thoroughly with clean water after the cleaning process. This will remove any remaining cleaning solution and prevent any potential off-flavors in your beer. Connect a clean line to the beer faucet and run water through the lines until it runs clear.
Cleaning keg lines on Kegco is a straightforward process that involves filling the system with a suitable cleaning solution, soaking the lines, flushing out the dirty solution, replacing it with fresh solution, and finally rinsing the lines with clean water. Following these steps regularly will help maintain the quality and taste of your beer, ensuring a delightful drinking experience every time.