To mix Star San in a spray bottle, you will need to follow the appropriate dilution rate and ensure that all surfaces are properly cleaned and rinsed before applying the sanitizer.
Here are the steps to mix Star San in a spray bottle:
1. Gather your supplies: You will need a spray bottle, Star San sanitizer, and water.
2. Measure the correct amount of Star San: The recommended dilution rate for Star San is 1 ounce (29.57ml) per 5 gallons (18.93L) of water. So, if you have a smaller spray bottle, you will need to adjust the amount of Star San accordingly. For example, if you have a 32-ounce spray bottle, you would use approximately 0.64 ounces (18.9ml) of Star San.
3. Add the Star San to the spray bottle: Carefully pour the measured amount of Star San into the spray bottle. It is important to be precise with the measurement to ensure the proper concentration of the sanitizer.
4. Add water to the spray bottle: Fill the rest of the spray bottle with clean water. Make sure to leave some space at the top to allow for shaking and mixing.
5. Secure the spray bottle cap tightly: Ensure that the spray bottle cap is securely fastened to prevent any leakage or spills.
6. Shake well to mix: Vigorously shake the spray bottle to thoroughly mix the Star San and water. This will help to distribute the sanitizer evenly throughout the solution.
Once you have mixed the Star San in the spray bottle, you can proceed to sanitize the desired surfaces. It is important to note that before applying the sanitizer, all surfaces should be properly cleaned and rinsed to remove any dirt, debris, or residues.
To use the Star San spray bottle:
1. Spray the surfaces: Apply the Star San solution to the surfaces that need to be sanitized. Make sure to cover all areas evenly.
2. Allow contact time: After applying the sanitizer, allow it to remain in contact with the surfaces for 1 to 2 minutes. This contact time is essential for the sanitizer to effectively kill any bacteria or microorganisms present.
3. Drain thoroughly: After the appropriate contact time, thoroughly drain the sanitizing solution from the equipment or surfaces. It is important to ensure that no excess sanitizer remains, as this can affect the taste or quality of your beverages.
By following these steps, you can effectively mix Star San in a spray bottle and sanitize your equipment and surfaces. Remember to always read and follow the manufacturer's instructions for the specific product you are using.