What do you clean beer kegs with?

Answered by Michael Blake

As an expert sommelier and brewer, I have had extensive experience with cleaning kegs in breweries. The process of cleaning kegs is crucial to maintaining the quality and taste of the beer that is served to customers. Traditionally, hot and alkaline liquid cleaning solutions have been used for this purpose.

The cleaning solutions used in breweries typically contain sodium hydroxide (NaOH) or potassium hydroxide (KOH). These chemicals have a high pH level of 12-14, which means they are highly alkaline. The alkalinity of these solutions helps to break down and hydrolyze soil and other contaminants that may be present in the kegs.

When it comes to cleaning kegs, the first step is usually to rinse them with hot water to remove any residual beer or other liquids. This initial rinse helps to loosen and dissolve any remaining residue in the kegs. It also helps to raise the temperature of the kegs, which aids in the cleaning process.

After the initial rinse, the kegs are then filled with the alkaline cleaning solution. The high pH of the solution helps to break down and dissolve any remaining soil or contaminants inside the kegs. The kegs are typically left to soak in the cleaning solution for a specific period of time, which may vary depending on the level of soiling.

During the soaking process, the alkaline solution penetrates the soil and helps to lift it off the surface of the kegs. This makes it easier to remove the soil during the subsequent rinsing stage. The alkaline solution also helps to remove any stains or discoloration on the kegs, leaving them looking clean and pristine.

Once the soaking time is complete, the kegs are thoroughly rinsed with hot water to remove the cleaning solution and any loosened soil. This rinsing process is crucial to ensure that no residue of the alkaline solution remains in the kegs, as it could affect the flavor and quality of the beer.

In some cases, a final sanitization step may be carried out after the rinsing process. This involves using a sanitizing solution, typically containing chlorine or another approved sanitizer, to kill any remaining bacteria or microorganisms that may be present in the kegs. This step helps to ensure that the kegs are fully cleaned and ready for use in the process.

Cleaning kegs is not just a routine task in breweries; it is an essential part of maintaining the quality and integrity of the beer that is served to customers. Proper cleaning procedures, including the use of alkaline cleaning solutions, help to ensure that kegs are free from any contaminants that could affect the taste and aroma of the beer.

From my personal experiences in the brewing industry, I have seen firsthand the importance of cleaning kegs properly. Neglecting this aspect can lead to off-flavors, contamination, and ultimately, unhappy customers. Therefore, breweries must prioritize the cleaning process and use effective cleaning solutions to maintain the high standards expected in the industry.